Close × Productpage Brochure Specifications Video Applications Registration

Specifications LX500e Label Printer

Print Method: Inkjet
Print Resolutions: 4800 x 1200 dpi, 2400 x 1200 dpi, 600 x 600 dpi
Print Speed: Up to 50.8 mm (2”) per second
Ink Cartridges: Colour (CMY)
Colours: 16.7 million
Print Width: 19mm (0.75") to 101.6mm (4")
Print Length: 19mm (0.75") to 609.6mm (24")
Media Width: 25.4mm (1") to 108mm (4.25")
Media Types: Roll-fed pressure-sensitive labels,
roll-fed tags,
fan-fold labels or tags
Media Sensing: Moveable see-through sensor for die-cut labels;
Reflective for labels and tags with black stripe;
Continuous label stock; Preprinted label stock.
Supply Roll: 127mm (5") maximum diameter on 50.8mm ( 2") core. Core has additional restrictions – see manual.
Ink Level Warning: Calculates actual number of prints remaining based upon ink usage of graphics being printed (patent-pending)
Indicator Lights: Power, Ink
Controls: Pause, Load/Feed, Unload
Recommended Minimum System: For PC: Pentium® IV computer or better, 512MB RAM, 5GB free hard drive space, USB 2.0 or USB 1.1
For Mac: 1 GHz Intel processor or higher, capable of running Mac OS X v10.9 or higher, 1GB RAM, one available USB port
Label Design Software: NiceLabel® SE Primera Edition and Bartender Ultralite included.
Can also be used with most other popular label design software programs.
Electrical Rating: 12VDC, 5.0A
Power Requirements: 100-240VAC, 50/60 Hz, 60 watts
Certifications: UL, UL-C, CE
Weight: 3.2 kg (7.0 lbs.)
Dimensions: 264mmW x 389mmD x 180mmH (closed), 442mmH (open)
(10.4”W x 15.3”D x 7.1”H (closed), 17.4”(open))
Options: Ink Cartridge, Tri-Color #53374 or #53376 (slower speed).
LX500e #74274
LX500ec #74276 (with cutter)
Operating Systems: Windows® 7/8/10+ or Mac OS X 10.9 or higher
Included:Label design software for Windows,
4x3“ Paper High Gloss starter roll and starter tri-color cartridge.

Label Specifications

Max Min
Label width: 107.95mm (4.25") 25.4mm (1")
Liner/media width: 111.13mm (4.375") 38.1mm (1.5")
Label height/length: 431.8mm (17") 12.7mm (0.5")
Gap between labels: 254mm (10") 2.5mm (0.10")
Width of thru-hole opening: 12.7mm (0.5") 6.325mm (0.25")
Distance from edge of media to edge of thru-hole: 57mm (2.25") 5.06mm (0.20")
Reflective/Black Mark Width*: N/A 2.54mm (0.1")
Max Outer Diameter (OD): 127mm (5.0") N/A
Inner Core Diameter (ID): 50.8mm (2.0") N/A
Total Thickness (Liner + Label)**: 10 mil (0.010”) N/A
Distance from edge of media to edge of label: Printer driver assumes 2 mm gap. However, this is adjustable via the left margin offset.

* The Reflective/Black Mark should be opaque to infrared light. The mark should be between the labels. The end of the mark should correspond with the beginning of the label.
** This is the recommended maximum. There are two factors that determine whether the printer will accept any particular stock thickness.